- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The TILT RACK E-W & N-S – GP is a durable and installation-friendly solar mounting solution designed for rooftop solar applications. This 4.8 kWp configuration is engineered to support 8 solar panels of 600 Wp each in a compact 4×2 layout.
Designed for both East-West (E-W) and North-South (N-S) mounting orientations, this GP configuration combines GP-specific leg profiles and base supports with copper stabilizers, high-strength rails and premium fastening hardware for a secure and reliable installation.
The complete kit includes structural profiles, stabilizers, long rails, rail connectors, grip plates, Z clamps, U clamps, EPDM tape and all required mounting hardware for the specified 8-panel configuration.
| Product | TILT RACK E-W & N-S – GP |
| System Capacity | 4.8 kWp / 4800 Wp |
| Panel Layout | 4 × 2 |
| Module Count | 8 Panels |
| Module Wattage | 600 Wp per module |
| Total Module Capacity | 4800 Wp / 4.8 kWp |
| Panel Orientation | E-W & N-S |
| System Type | GP |
| Leg Profiles | T1-L680 – GP & T1-L320 – GP |
| Stabilizer | CU 60×21×21×0.80 (L1650 & L1450) |
| End Clamp | Z Clamp – 35 mm |
| Mid Clamp | U Clamp |
| Long Rails | L2250 & L2850 |
| Rail Connector | L80 |
| Fastener Material | SS304/A2 for specified fasteners |
Note: Final installation suitability should be verified according to module dimensions, roof conditions, structural requirements, wind loads and project-specific design requirements.
| Component | Quantity |
|---|---|
| LEG PROFILE T1-L680 – GP | 10 |
| LEG PROFILE T1-L320 – GP | 10 |
| TR BASE SUPPORT 6H – GP | 20 |
| STABILIZER CU 60×21×21×0.80 L1650 | 14 |
| STABILIZER CU 60×21×21×0.80 L1450 | 20 |
| Z CLAMP 35 | 8 |
| U CLAMP | 12 |
| RAIL NUT (M8) | 20 |
| SPRING WASHER M8 SS304/A2 | 20 |
| PLAIN WASHER M8 SS304/A2 | 140 |
| ALLEN BOLT M8x70 | 60 |
| ALLEN BOLT M8x20 SS304/A2 | 20 |
| RIVET (Ø4.8 × 19mm) | 80 |
| HEX NUT (M8) | 60 |
| RX-32 SCREW | 104 |
| EPDM TAPE (W-30mm × T-1mm × L-5m) | 0.46 |
| LONG RAIL L2250 | 4 |
| LONG RAIL L2850 | 4 |
| L-ANGLE 55 – D9 | 20 |
| CLAMP SPACER – PVC | 20 |
| RAIL CONNECTOR L80 | 4 |
| GRIP PLATE 3T×L90 | 4 |
This configuration is designed for 8 solar panels of 600 Wp each, providing a total capacity of 4.8 kWp (4800 Wp).
The 4.8 kW configuration supports 8 solar modules arranged in a 4×2 layout.
The system is designed for both East-West (E-W) and North-South (N-S) mounting orientations.
GP refers to the specific GP configuration, which includes GP leg profiles and GP base supports designed for this mounting system.
The kit includes 8 Z Clamps 35 and 12 U Clamps for securely fastening the solar modules.
The kit includes CU stabilizers measuring 60×21×21×0.80 in both L1650 and L1450 lengths.
Yes. The kit includes 4 × L2250 Long Rails, 4 × L2850 Long Rails and 4 × L80 Rail Connectors.
Yes. The kit includes Allen bolts, rail nuts, washers, hex nuts, rivets, RX-32 screws, EPDM tape, L-angles, clamp spacers, grip plates and all other specified mounting hardware.
Yes. The kit includes EPDM Tape (W-30mm × T-1mm × L-5m) with the specified quantity of 0.46.
This specific configuration is designed for 8 × 600 Wp modules. For different module dimensions or capacities, compatibility should be verified before installation.
Thanks for subscribing!
This email has been registered!