- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The TILT RACK E-W & N-S – GP is a practical and reliable solar mounting solution designed for rooftop solar installations. This 1.2 kWp configuration is designed to accommodate 2 solar panels of 600 Wp each in a compact 2×1 layout.
Designed for East-West (E-W) and North-South (N-S) mounting orientations, the system features GP-specific leg profiles and base supports, copper stabilizers, aluminium mid clamps and SS304/A2 fastening hardware.
The complete kit includes structural profiles, stabilizers, rails, end and mid clamps, mounting hardware, EPDM tape and other components required for the specified 2-panel configuration.
| Product | TILT RACK E-W & N-S – GP |
| System Capacity | 1.2 kWp / 1200 Wp |
| Panel Layout | 2 × 1 |
| Module Count | 2 Panels |
| Module Wattage | 600 Wp per module |
| Total Module Capacity | 1200 Wp / 1.2 kWp |
| Panel Orientation | E-W & N-S |
| System Type | GP |
| Leg Profiles | T1-L680 – GP & T1-L320 – GP |
| Stabilizer | CU 60×21×21×0.80, L1650 & L1450 |
| End Clamp | Z Type – 35 mm |
| Mid Clamp | U Type – 35 mm AL 6063-T6 |
| Long Rail | L2450 |
| Fastener Material | SS304/A2 for specified fasteners |
Note: Final installation suitability should be verified according to module dimensions, roof conditions, structural requirements and project-specific design requirements.
| Component | Quantity |
|---|---|
| LEG PROFILE T1-L680 – GP | 3 |
| LEG PROFILE T1-L320 – GP | 3 |
| TR BASE SUPPORT 6H – GP | 6 |
| STABILIZER CU 60x21x21x0.80 L1650 | 5 |
| STABILIZER CU 60x21x21x0.80 L1450 | 6 |
| END CLAMP (Z Type) – 35mm | 4 |
| MID CLAMP (U Type) – 35mm AL 6063-T6 | 2 |
| RAIL NUT – M8 | 6 |
| SPRING WASHER M8 SS304/A2 | 6 |
| PLAIN WASHER M8 SS304/A2 | 42 |
| ALLEN BOLT M8x70 | 18 |
| ALLEN BOLT M8x20 SS304/A2 | 6 |
| POP RIVET 4.8x19 – AL | 24 |
| HEX NUT M8 SS304/A2 | 18 |
| SELF DRILLING SCREW 12x32 RX (Epoxy Coated) | 28 |
| EPDM TAPE 3mmx30mmx5m | 0.138 |
| LONG RAIL L2450 | 2 |
| L-ANGLE 55 – D9 | 6 |
| CLAMP SPACER – PVC | 6 |
This configuration is designed for 2 solar panels of 600 Wp each, providing a total capacity of 1.2 kWp (1200 Wp).
The 1.2 kW configuration supports 2 solar modules arranged in a 2×1 layout.
The system is designed for both East-West (E-W) and North-South (N-S) mounting orientations.
GP refers to the specific GP configuration of the Tilt Rack system, including the specified GP leg profiles and GP base supports supplied in this kit.
The kit includes Z Type 35 mm End Clamps and U Type 35 mm AL 6063-T6 Mid Clamps.
The kit includes CU 60x21x21x0.80 stabilizers in L1650 and L1450 lengths.
Yes. The kit includes 2 × L2450 Long Rails.
Yes. The kit includes Allen bolts, rail nuts, washers, nuts, pop rivets, self-drilling screws, EPDM tape, L-angles and clamp spacers as specified.
Yes. The TILT RACK E-W & N-S – GP is designed as a mounting solution for the specified rooftop solar configuration.
This specific configuration is calculated for 2 × 600 Wp modules. For different module dimensions or capacities, compatibility should be verified before ordering.
Thanks for subscribing!
This email has been registered!