- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The TILT RACK E-W & N-S – ALU is a robust and installation-friendly aluminium solar mounting solution designed for rooftop solar applications. This 4.8 kWp configuration is designed to accommodate 8 solar panels of 600
Wp each in a compact 4×2 layout.
The system supports both East-West (E-W) and North-South (N-S) mounting orientations and combines aluminium structural components with SS304/A2 hardware for a durable and reliable installation.
The complete kit includes leg profiles, stabilizers, rails, end and mid clamps, rail connectors, grip plates, EPDM tape and the required fastening hardware for the specified 8-panel configuration.
| Product | TILT RACK E-W & N-S – ALU |
| System Capacity | 4.8 kWp |
| Panel Layout | 4 × 2 |
| Module Count | 8 Panels |
| Module Wattage | 600 Wp per module |
| Total Module Capacity | 4800 Wp / 4.8 kWp |
| Panel Orientation | E-W & N-S |
| Primary Material | Aluminium |
| Aluminium Grade | AL 6063-T6 |
| End Clamp | Z Type – 35 mm |
| Mid Clamp | U Type – 35 mm AL 6063-T6 |
| Long Rails | L2250 & L2850 |
| Rail Connector | L80 |
| Hardware | SS304/A2 and specified mounting hardware |
| Component | Quantity |
|---|---|
| LEG PROFILE T1-L680 | 10 |
| LEG PROFILE T3-L320 | 10 |
| TR BASE SUPPORT 6H | 20 |
| CLAMPING PLATE 15D | 20 |
| STABILIZER LW19T1.8 L1650 AL 6063-T6 | 14 |
| STABILIZER LW19T1.8 L1450 AL 6063-T6 | 20 |
| END CLAMP (Z Type) – 35mm | 8 |
| MID CLAMP (U Type) – 35mm AL 6063-T6 | 12 |
| RAIL NUT – M8 | 40 |
| SPRING WASHER M8 SS304/A2 | 20 |
| PLAIN WASHER M8 SS304/A2 | 188 |
| ALLEN BOLT M8x70 | 60 |
| ALLEN BOLT M8x20 SS304/A2 | 56 |
| ALLEN BOLT M8x25 | 12 |
| POP RIVET 4.8x19 – AL | 80 |
| HEX NUT M8 SS304/A2 | 60 |
| EPDM TAPE 3mmx30mmx5m | 0.46 |
| SELF DRILLING SCREW 12x32 RX (Epoxy Coated) | 104 |
| L-ANGLE 55 – D9 | 20 |
| CLAMP SPACER – PVC | 20 |
| LONG RAIL L2250 | 4 |
| LONG RAIL L2850 | 4 |
| RAIL CONNECTOR L80 | 4 |
| GRIP PLATE 3TxL90 | 4 |
This configuration is designed for 8 solar panels of 600 Wp each, providing a total capacity of 4.8 kWp (4800 Wp).
The 4.8 kW configuration supports 8 solar modules arranged in a 4×2 layout.
The system is designed for both East-West (E-W) and North-South (N-S) mounting orientations.
The kit includes Z Type 35 mm End Clamps and U Type 35 mm Aluminium Mid Clamps.
The primary structural components are aluminium, with specified components made from AL 6063-T6. The kit also includes SS304/A2 hardware.
Yes. The kit includes L2250 and L2850 Long Rails along with L80 Rail Connectors.
Yes. The kit includes bolts, nuts, washers, rail nuts, pop rivets, self-drilling screws, EPDM tape, grip plates and other components listed in the kit content.
Yes. The TILT RACK E-W & N-S – ALU is designed for rooftop solar mounting applications for the specified panel configuration.
This specific configuration is calculated for 8 × 600 Wp modules. For different module dimensions or capacities, compatibility should be verified before ordering.
Thanks for subscribing!
This email has been registered!