- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The TILT RACK E-W & N-S – ALU is a robust aluminium solar mounting solution designed for rooftop solar installations. This configuration supports 6 solar panels in a 6×1 layout, with a total system capacity of 3.6 kWp when used with 600 Wp modules.
Designed for efficient module positioning in East-West and North-South orientations, the system combines aluminium structural components with stainless-steel hardware for a durable, reliable and installation-friendly mounting solution.
The pre-defined kit includes leg profiles, stabilizers, rails, module clamps, mounting hardware, EPDM protection tape and other required components for assembling the specified 6-panel system.
| Product | TILT RACK E-W & N-S – ALU |
| System Capacity | 3.6 kWp |
| Panel Orientation | 6 × 1 |
| Module Count | 6 Panels |
| Module Wattage | 600 Wp per module |
| Total Module Capacity | 3600 Wp / 3.6 kWp |
| Mounting Orientation | E-W & N-S |
| Primary Material | Aluminium |
| End Clamp | Z Type – 35 mm |
| Mid Clamp | U Type – 35 mm, AL 6063-T6 |
| Long Rails | L2250 & L2850 |
| Rail Connector | L80 |
| Hardware | SS304/A2 and specified mounting hardware |
| Component | Quantity |
|---|---|
| LEG PROFILE T1-L680 | 7 |
| LEG PROFILE T3-L320 | 7 |
| TR BASE SUPPORT 6H | 14 |
| CLAMPING PLATE 15D | 14 |
| STABILIZER LW19T1.8 L1650 AL 6063-T6 | 9 |
| STABILIZER LW19T1.8 L1450 AL 6063-T6 | 14 |
| END CLAMP (Z Type) – 35mm | 4 |
| MID CLAMP (U Type) – 35mm AL 6063-T6 | 10 |
| RAIL NUT – M8 | 28 |
| SPRING WASHER M8 SS304/A2 | 14 |
| PLAIN WASHER M8 SS304/A2 | 134 |
| ALLEN BOLT M8x70 | 42 |
| ALLEN BOLT M8x20 SS304/A2 | 40 |
| ALLEN BOLT M8x25 | 10 |
| POP RIVET 4.8x19 – AL | 56 |
| HEX NUT M8 SS304/A2 | 42 |
| EPDM TAPE 3mmx30mmx5m | 0.322 |
| SELF DRILLING SCREW 12x32 RX (Epoxy Coated) | 60 |
| L-ANGLE 55 – D9 | 14 |
| CLAMP SPACER – PVC | 14 |
| LONG RAIL L2250 | 4 |
| LONG RAIL L2850 | 2 |
| RAIL CONNECTOR L80 | 4 |
| GRIP PLATE 3TxL90 | 4 |
This configuration is designed for 6 solar panels of 600 Wp each, providing a total capacity of 3.6 kWp (3600 Wp).
The 3.6 kW configuration supports 6 solar modules in a 6×1 layout.
The Tilt Rack system is designed for East-West (E-W) and North-South (N-S) mounting configurations.
The kit includes Z Type 35 mm End Clamps and U Type 35 mm Aluminium Mid Clamps.
The primary mounting components are made from aluminium, including AL 6063-T6 components specified in the kit.
Yes. The kit includes L2250 and L2850 Long Rails along with L80 Rail Connectors.
Yes. The kit includes the specified bolts, nuts, washers, rail nuts, rivets, self-drilling screws, EPDM tape and other listed installation components.
Yes. The Tilt Rack E-W & N-S – ALU is designed as a rooftop solar mounting solution for the specified module and configuration.
The listed configuration is specifically calculated for 6 × 600 Wp modules. For different module dimensions or capacities, compatibility should be checked before ordering.
Thanks for subscribing!
This email has been registered!