- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The Portrait Short Rack PT-100 with Mid Clamp is a compact and reliable solar mounting solution designed for metal roof solar installations. It provides a secure mounting interface for solar modules while offering a simple, low-profile and material-efficient solution for rooftop solar projects.
The PT-100 is supplied as a complete mounting set with a U-Type Mid Clamp, M8 Rail Nut, SS304/A2 fasteners, aluminium rivets and EPDM tape, making it convenient for installation without the need to source the main mounting accessories separately.
The Aluminium 6063-T6 Mid Clamp is available for compatible solar module frame heights of 30 mm, 35 mm and 40 mm. The system is suitable for residential, commercial and industrial rooftop solar applications where the roof profile and fixing conditions are compatible.
Important: The listed price is for a set of 10 Short Rack PT-100 units. Accessories are supplied with each rail as specified in the kit contents below.
| Product Name | Short Rack PT-100 with Mid Clamp |
| Product Type | Short Rail Solar Mounting System |
| Application | Metal Roof Solar Installation |
| Mounting Configuration | Short Rail with Mid Clamp |
| Module Orientation | Portrait |
| Mid Clamp Type | U-Type |
| Compatible Module Frame Height | 30 mm / 35 mm / 40 mm |
| Mid Clamp Material | Aluminium 6063-T6 |
| Rail Nut | M8 |
| Spring Nut | M8 – Coated Galvanised |
| Allen Bolt | M8 × 20 – SS304/A2 |
| Plain Washer | M8 – SS304/A2 |
| Spring Washer | M8 – SS304/A2 |
| Rivet | TF 6.4 × 23 – Aluminium |
| EPDM Tape | 3 mm × 40 mm × 5 m |
| Suitable Roof | Metal / Trapezoidal Roof |
Note: Final fixing and structural suitability should be verified according to the roof profile, sheet thickness, site wind loads and project engineering requirements.
Each Short Rack PT-100 with Mid Clamp set includes:
| Component | Quantity / Set |
|---|---|
| Short Rack PT-100 | 1 No. |
| Rivet (TF) 6.4 × 23 – Aluminium | 4 Nos. |
| Mid Clamp (U-Type) – 30 / 35 / 40 mm – Aluminium 6063-T6 | 1 No. |
| Rail Nut – M8 | 1 No. |
| Allen Bolt M8 × 20 – SS304/A2 | 1 No. |
| Plain Washer M8 – SS304/A2 | 1 No. |
| Spring Washer M8 – SS304/A2 | 1 No. |
| EPDM Tape 3 mm × 40 mm × 5 m | 1 No. |
Note: The above accessories are supplied with each Short Rack PT-100 with Mid Clamp set. The total number of sets required depends on the solar module quantity and project layout.
It is a short-rail solar mounting solution designed for installing solar modules on suitable metal roofs, with the module secured to the rail using a Mid Clamp.
The PT-100 is designed for compatible metal and trapezoidal roof applications. Roof profile, sheet thickness and fixing conditions should be verified before installation.
Yes. Each set includes one U-Type Mid Clamp along with the specified rail, fasteners, washers, rivets and EPDM tape.
The U-Type Mid Clamp is available for compatible module frame heights of 30 mm, 35 mm and 40 mm.
The Mid Clamp is manufactured from Aluminium 6063-T6.
Yes. Each set includes 3 mm × 40 mm × 5 m EPDM tape for use at the mounting interface as required by the installation design.
The set includes an M8 × 20 SS304/A2 Allen Bolt, M8 SS304/A2 Plain Washer, M8 SS304/A2 Spring Washer and an M8 Rail Nut.
The supplied kit includes 4 aluminium TF 6.4 × 23 rivets per set. The final roof-fixing method should follow the approved project design and installation procedure.
Yes. Short-rail systems can be used for residential, commercial and industrial rooftop projects when the roof and mounting system are suitably engineered for the site conditions.
Yes. Its compact design and pre-supplied mounting accessories help simplify installation and reduce the need for separately sourced components.
Thanks for subscribing!
This email has been registered!