- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The Classic Rack GP Structure – 6.0 kWp is a robust and cost-effective solar mounting solution designed for a 10-panel layout in a 5 × 2 configuration. It accommodates 10 solar modules of 600 Wp each, providing a total installed capacity of 6.0 kWp.
The structure features galvanised structural components that offer strength, durability and corrosion resistance for long-term outdoor applications. It is combined with SS304/A2 fastening hardware and reliable clamping components for secure module installation.
The complete mounting kit includes base supports, leg profiles, short racks, clamping plates, stabilizers, end and mid clamps, anchor bolts, screws, spacers and fastening hardware required for the specified 10-panel configuration.
| Parameter | Specification |
|---|---|
| Product | Classic Rack GP Structure |
| Panel Layout | 10 Panels |
| Panel Orientation | 5 × 2 |
| Module Count | 10 Modules |
| Module Wattage | 600 Wp per module |
| Total Capacity | 6.0 kWp |
| Primary Structural Material | Galvanised (GP) |
| Base Support | L150 |
| Leg Profile | T1-L320 / T1-L680 |
| Short Rack | PT-41 L100 |
| End Clamp | Z Type – 35 mm |
| Mid Clamp | U Type – 35 mm |
| Fastener Material | SS304 / A2 and Galvanised |
| Clamp Spacer | PVC |
| Stabilizer | CU 52 × 20 × 20 × 0.65 mm |
| Description | Total Qty |
|---|---|
| CL Base Support – L150 mm | 24 |
| Leg Profile T1-L320 | 12 |
| Leg Profile T1-L680 | 12 |
| Short Rack PT-41 L100 | 24 |
| Clamping Plate 15D | 24 |
| RX-32 Screw | 136 |
| Stabilizer CU 52 × 20 × 20 × 0.65 L1650 | 12 |
| Stabilizer CU 52 × 20 × 20 × 0.65 L1450 | 14 |
| Clamp Spacer – PVC | 24 |
| Allen Bolt M8 × 70 | 72 |
| Allen Bolt M8 × 25 | 24 |
| Hex Nut M8 SS304/A2 | 72 |
| Plain Washer M8 SS304/A2 | 168 |
| Spring Washer M8 SS304/A2 | 24 |
| Spring Nut M8 – Coated Galvanised | 24 |
| Anchor Bolt M8 × 75 – Galvanised | 48 |
| End Clamp (Z Type) – 35 mm | 8 |
| Mid Clamp (U Type) – 35 mm | 16 |
This configuration is designed to accommodate 10 solar modules in a 5 × 2 layout.
It is designed for 10 × 600 Wp solar modules, providing a total capacity of 6.0 kWp.
The primary structural components are manufactured using Galvanised (GP) material, combined with SS304/A2 fastening hardware and specified clamping components.
The kit includes 8 Z-Type 35 mm end clamps and 16 U-Type 35 mm mid clamps.
Yes. The kit includes 48 galvanised M8 × 75 anchor bolts for secure fixing.
Yes. The kit includes CU stabilizers in 1650 mm and 1450 mm lengths for the specified 10-panel configuration.
Yes. The galvanised structural construction makes it suitable for appropriate rooftop solar applications, subject to site-specific structural, wind-load and installation requirements.
Yes. The kit includes the listed base supports, leg profiles, short racks, clamping plates, clamps, stabilizers, anchor bolts, screws, fasteners and PVC spacers for the specified 10-panel configuration.
Thanks for subscribing!
This email has been registered!