- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The Classic Rack – GP 2.4 kWp is a robust and cost-effective solar mounting solution designed for a 4-panel layout in a 4 × 1 configuration. It accommodates 4 solar modules of 600 Wp each, providing a total installed capacity of 2.4 kWp.
The system is designed with galvanised structural components for strength and durability, combined with stainless-steel fastening hardware and aluminium clamping components. This construction provides a reliable and weather-resistant mounting solution for suitable rooftop solar applications.
The complete kit includes base supports, leg profiles, short racks, clamping plates, stabilizers, clamps, anchor bolts, fastening hardware and PVC spacers required for the specified 4-panel configuration.
| Parameter | Specification |
|---|---|
| Product | Classic Rack – GP 2.4 kWp |
| Panel Layout | 4 Panels |
| Panel Orientation | 4 × 1 |
| Module Count | 4 Modules |
| Module Wattage | 600 Wp per module |
| Total Capacity | 2.4 kWp |
| Primary Structural Material | Galvanised (GP) |
| Base Support | L150 |
| Leg Profile | T1-L320 / T1-L680 |
| Short Rack | PT-41 L100 |
| End Clamp | Z Type – 35 mm |
| Mid Clamp | U Type – 35 mm |
| Fastener Material | SS304 / A2 and Galvanised |
| Clamp Spacer | PVC |
| Stabilizer | CU 52 × 20 × 20 × 0.65 mm |
| Description | Total Qty |
|---|---|
| CL Base Support – L150 mm | 10 |
| Leg Profile T1-L320 | 5 |
| Leg Profile T1-L680 | 5 |
| Short Rack PT-41 L100 | 10 |
| Clamping Plate 15D | 10 |
| RX-32 Screw | 68 |
| Stabilizer CU 52 × 20 × 20 × 0.65 L1650 | 5 |
| Stabilizer CU 52 × 20 × 20 × 0.65 L1450 | 6 |
| Clamp Spacer – PVC | 10 |
| Allen Bolt M8 × 70 | 30 |
| Allen Bolt M8 × 25 | 10 |
| Hex Nut M8 SS304/A2 | 30 |
| Plain Washer M8 SS304/A2 | 70 |
| Spring Washer M8 SS304/A2 | 10 |
| Spring Nut M8 – Coated Galvanised | 10 |
| Anchor Bolt M8 × 75 – Galvanised | 20 |
| End Clamp (Z Type) – 35 mm | 4 |
| Mid Clamp (U Type) – 35 mm | 6 |
The Classic Rack – GP 2.4 kWp configuration is designed to accommodate 4 solar modules in a 4 × 1 layout.
It is designed for 4 × 600 Wp solar modules, providing a total capacity of 2.4 kWp.
The primary structural components are manufactured using Galvanised (GP) material, with stainless-steel hardware used for specified fastening components.
The kit includes 4 Z-Type 35 mm end clamps and 6 U-Type 35 mm mid clamps.
Yes. The kit includes 20 galvanised M8 × 75 anchor bolts for secure fixing.
Yes. The kit includes CU stabilizers in 1650 mm and 1450 mm lengths for the specified 4-panel configuration.
Yes. The galvanised structural construction makes it suitable for appropriate rooftop solar applications, subject to site-specific structural, wind-load and installation requirements.
Yes. The kit includes the listed base supports, leg profiles, short racks, clamping plates, clamps, stabilizers, anchor bolts, screws, fasteners and PVC spacers for the specified 4-panel configuration.
Thanks for subscribing!
This email has been registered!