- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The Classic Rack – GP is a robust and cost-effective solar mounting solution designed for a 2-panel layout in a 2 × 1 configuration. It accommodates 2 solar modules of 600 Wp each, providing a total installed capacity of 1.2 kWp.
The structure uses Galvanised (GP) components for key structural elements, combined with aluminium clamping components and SS304/A2 stainless-steel hardware. This combination provides a strong, reliable and weather-resistant mounting solution for suitable rooftop solar applications.
The complete kit includes GP base supports and leg profiles, short racks, clamping plates, stabilizers, end and mid clamps, anchor bolts, fasteners, spacers and installation accessories required for the specified 2-panel configuration.
| Parameter | Specification |
|---|---|
| Product | Classic Rack – GP |
| Panel Layout | 2 Panels |
| Panel Orientation | 2 × 1 |
| Module Count | 2 Modules |
| Module Wattage | 600 Wp per module |
| Total Capacity | 1.2 kWp |
| Primary Structural Material | Galvanised (GP) |
| Base Support | GP L150 |
| Leg Profile | T1-L320 GP / T1-L680 GP |
| Short Rack | PT-41 L100 |
| End Clamp | Z Type – 35 mm |
| Mid Clamp | U Type – 30 mm, AL 6063-T6 |
| Fastener Material | SS304 / A2 and Galvanised |
| Clamp Spacer | PVC |
| Stabilizer | CU 52 × 20 × 20 × 0.65 mm |
| Description | Total Qty |
|---|---|
| CLR Base Support GP L150 | 6 |
| Leg Profile T1-L320 – GP | 3 |
| Leg Profile T1-L680 – GP | 3 |
| Short Rack PT-41 L100 | 6 |
| Clamping Plate 15D | 6 |
| Self Drilling Screw 12 × 32 RX – Epoxy Coated | 4 |
| Stabilizer CU 52 × 20 × 20 × 0.65 L1650 | 3 |
| Stabilizer CU 52 × 20 × 20 × 0.65 L1450 | 4 |
| Clamp Spacer – PVC | 6 |
| Allen Bolt M8 × 70 | 18 |
| Allen Bolt M8 × 25 | 25 |
| Hex Nut M8 SS304/A2 | 18 |
| Plain Washer M8 SS304/A2 | 42 |
| Spring Washer M8 SS304/A2 | 6 |
| Spring Nut M8 – Coated Galvanised | 6 |
| Anchor Bolt M8 × 75 – Galvanised | 12 |
| End Clamp (Z Type) – 35 mm | 4 |
| Mid Clamp (U Type) – 30 mm, AL 6063-T6 | 2 |
The Classic Rack – GP configuration is designed to accommodate 2 solar modules in a 2 × 1 layout.
It is designed for 2 × 600 Wp solar modules, providing a total capacity of 1.2 kWp.
The key structural components are manufactured using Galvanised (GP) material, with aluminium and stainless-steel components used for specified clamps and fasteners.
The kit includes 4 Z-Type 35 mm end clamps and 2 U-Type 30 mm mid clamps.
Yes. The kit includes 12 galvanised M8 × 75 anchor bolts for secure fixing.
Yes. The kit includes CU stabilizers in 1650 mm and 1450 mm lengths for the specified configuration.
Yes. The galvanised structural components provide a robust mounting solution for suitable rooftop solar applications, subject to site-specific structural, wind-load and installation requirements.
Yes. The kit includes the listed GP structural components, short racks, clamping plates, clamps, stabilizers, anchor bolts, fasteners, spacers and installation accessories for the specified 2-panel configuration.
Thanks for subscribing!
This email has been registered!