- Choosing a selection results in a full page refresh.
Couldn't load pickup availability
The Classic Rack – Aluminium 4.8 kWp is a lightweight, durable and reliable solar mounting solution designed for an 8-panel layout in a 4 × 2 configuration. It accommodates 8 solar modules of 600 Wp each, providing a total installed capacity of 4.8 kWp.
Manufactured using high-quality aluminium components and SS304/A2 stainless-steel hardware, the Classic Rack offers a robust and corrosion-resistant mounting solution for suitable rooftop solar applications. Its optimized design provides secure module support while keeping the structure lightweight and easy to install.
The complete kit includes aluminium leg profiles, clamping plates, base supports, short racks, end and mid clamps, stabilizers, PVC spacers and fastening hardware required for the specified 8-panel configuration.
| Parameter | Specification |
|---|---|
| Product | Classic Rack – Aluminium 4.8 kWp |
| Panel Layout | 8 Panels |
| Panel Orientation | 4 × 2 |
| Module Count | 8 Modules |
| Module Wattage | 600 Wp per module |
| Total Capacity | 4.8 kWp |
| Primary Material | Aluminium |
| Aluminium Grade | AL 6063-T6 |
| Fastener Material | SS304 / A2 |
| Short Rack | PT-41 L100 |
| End Clamp | Z Type – 30 mm |
| Mid Clamp | U Type – 30 mm, AL 6063-T6 |
| Clamp Spacer | PVC |
| Stabilizer | CU 52 × 20 × 20 × 0.65 mm |
| Description | Total Qty |
|---|---|
| Leg Profile T1-L320 | 10 |
| Leg Profile T1-L680 | 10 |
| Clamping Plate 15D | 20 |
| CL Base Support – L150 mm, AL 6063-T6 | 20 |
| Allen Bolt M8 × 25 SS304/A2 | 20 |
| Allen Bolt M8 × 70 SS304/A2 | 60 |
| Plain Washer M8 SS304/A2 | 140 |
| Hex Nut M8 SS304/A2 | 60 |
| Spring Washer M8 SS304/A2 | 20 |
| Spring Nut M8 – Coated Galvanised | 20 |
| Short Rack PT-41 L100 | 20 |
| End Clamp (Z Type) – 30 mm | 8 |
| Mid Clamp (U Type) – 30 mm, AL 6063-T6 | 12 |
| Clamp Spacer – PVC | 20 |
| Pop Rivet 4.8 × 19 – Aluminium | 224 |
| Stabilizer CU 52 × 20 × 20 × 0.65 L1650 | 10 |
| Stabilizer CU 52 × 20 × 20 × 0.65 L1450 | 12 |
The Classic Rack 4.8 kWp configuration is designed to accommodate 8 solar modules in a 4 × 2 layout.
It is designed for 8 × 600 Wp solar modules, providing a total capacity of 4.8 kWp.
The mounting system primarily uses aluminium, with specified components manufactured from AL 6063-T6 aluminium.
The kit includes 8 Z-Type 30 mm end clamps and 12 U-Type 30 mm mid clamps.
The kit includes SS304/A2 M8 bolts, nuts, plain washers and spring washers, along with coated galvanised spring nuts and aluminium pop rivets.
Yes. The kit includes CU stabilizers in 1650 mm and 1450 mm lengths for the specified 8-panel configuration.
Yes. Its lightweight aluminium construction makes it suitable for appropriate rooftop solar applications, subject to site-specific structural, wind-load and installation requirements.
Yes. The kit includes the listed leg profiles, base supports, clamping plates, short racks, end and mid clamps, stabilizers, spacers and fastening hardware for the specified 8-panel configuration.
Thanks for subscribing!
This email has been registered!