30% Discount on applying this code at time of checkout
DISCOUNT30
- Choosing a selection results in a full page refresh.
30% Discount on applying this code at time of checkout
Couldn't load pickup availability
The 18 kWp Solar Carport Structure is a heavy-duty 2UP carport designed to accommodate 6 cars while providing a robust mounting framework for solar PV modules. The structure combines SHS legs and bracing, CS rafters, RHS purlins, and dedicated solar module mounting components for a strong and organized installation.
With a total structure and component weight of approximately 641.12 kg per set, this configuration is suitable for residential, commercial, institutional, industrial and parking-area solar installations where both vehicle parking and solar power generation are required.
The kit includes structural members, purlins, cleats, connectors, base supports, short rails, end clamps, mid clamps and the required M8/M10 fasteners, washers, nuts, pop rivets and SDS fasteners.
| Parameter | Specification |
|---|---|
| System Capacity | 18 kWp |
| Parking Capacity | 6 Cars |
| Configuration | 2UP Carport |
| Total Components | 1656 Nos. |
| Total Weight | 641.12 kg per set |
| Component | Specification | Length | Qty |
|---|---|---|---|
| Front Leg | SHS - 50x50x2 | 2700 mm | 4 |
| Back Leg | SHS - 50x50x2 | 2970 mm | 4 |
| Front Bracing | SHS - 50x50x2 | 3105 mm | 4 |
| Back Bracing | SHS - 50x50x2 | 3125 mm | 4 |
| Rafter | CS - 120x60x20x2 | 4000 mm | 4 |
| Purlin 3 | RHS 120x60x2.00 | 5500 mm | 12 |
| Purlin 6 | RHS 120x60x2.00 | 1150 mm | 4 |
| L-Cleat | LA-70x70x4 | 60 mm | 32 |
| Purlin Connector | LA-70x70x4 | 250 mm | 12 |
| Base Support | Explicit | 250 mm | 8 |
| Short Rail PT 41 | Explicit | 100 mm | 64 |
| End Clamp | Z Type - 35 mm | 40 mm | 8 |
| Mid Clamp | U Type - 30 mm | 40 mm | 56 |
The 18 kWp / 6-Car 2UP Solar Carport Kit includes all structural members, solar mounting components and specified fastening hardware required for the supplied configuration.
| No. | Component | Specification | Length | Qty |
|---|---|---|---|---|
| 1 | Front Leg | SHS - 50x50x2 | 2700 mm | 4 |
| 2 | Back Leg | SHS - 50x50x2 | 2970 mm | 4 |
| 3 | Front Bracing | SHS - 50x50x2 | 3105 mm | 4 |
| 4 | Back Bracing | SHS - 50x50x2 | 3125 mm | 4 |
| 5 | Rafter | CS - 120x60x20x2 | 4000 mm | 4 |
| 6 | Purlin 3 | RHS 120x60x2.00 | 5500 mm | 12 |
| 7 | Purlin 6 | RHS 120x60x2.00 | 1150 mm | 4 |
| 8 | L-Cleat | LA-70x70x4 | 60 mm | 32 |
| 9 | Purlin Connector | LA-70x70x4 | 250 mm | 12 |
| 10 | Base Support | Explicit | 250 mm | 8 |
| 11 | Short Rail PT 41 | Explicit | 100 mm | 64 |
| 12 | End Clamp | Z Type - 35 mm | 40 mm | 8 |
| 13 | Mid Clamp | U Type - 30 mm | 40 mm | 56 |
| 14 | Allen Bolt M8x25 | - | 25 mm | 64 |
| 15 | Allen Bolt M8x80 | - | 80 mm | 56 |
| 16 | M8 Spring Nut | - | - | 64 |
| 17 | M8 Hex Nut | - | - | 56 |
| 18 | M8 Spring Washer | - | - | 120 |
| 19 | M8 Plain Washer | - | - | 176 |
| 20 | Hex Bolt M10x30 | - | 30 mm | 88 |
| 21 | Hex Bolt M10x80 | Nut, SW, 2 PW | 75 mm | 32 |
| 22 | M10 Hex Nut | - | - | 120 |
| 23 | M10 Spring Washer | - | - | 120 |
| 24 | M10 Plain Washer | - | - | 240 |
| 25 | Pop Rivet #4.8x19 | - | - | 256 |
| 26 | SDS #35 | - | - | 48 |
Total Kit Quantity: 1656 components
Total Kit Weight: Approximately 641.12 kg per set
This solar carport is designed for an 18 kWp solar PV installation.
The structure is designed to accommodate 6 cars in a 2UP carport configuration.
2UP refers to a two-level parking arrangement where the solar carport structure is configured to serve the specified parking layout. This particular configuration accommodates 6 cars.
The complete listed kit has a total weight of approximately 641.12 kg per set.
The structure uses SHS 50x50x2 legs and bracing, CS 120x60x20x2 rafters, and RHS 120x60x2.00 purlins, along with cleats, connectors and base supports.
Yes. The kit includes Short Rail PT 41, Z Type 35 mm End Clamps, U Type 30 mm Mid Clamps and the associated M8 fastening hardware.
The kit includes M8 and M10 bolts, nuts, spring washers, plain washers, pop rivets and SDS #35 fasteners as specified in the BOM.
The BOM contains a total of 1656 components, including structural members, mounting components and fastening hardware.
It can be used for residential, commercial, industrial, institutional and dedicated parking-area solar installations where parking infrastructure is combined with solar power generation.
Thanks for subscribing!
This email has been registered!